P2 Alarm

P2 Alarm If your CellarPro cooling unit is flashing a "P2" alarm, do the following: On the control panel, press and hold the "SET" and "DOWN ARROW" buttons together for 3 seconds.  Release when the display starts blinking. Press and hold (again) the "SET" and "DOWN ARROW" buttons together for 7 seconds ("Pr2" will flash).  Using the "UP ARROW" or "DOWN ARROW" button, scroll through the parameters until "P2P" is displayed. Press "SET", then press the "UP ARROW" button to change from "y" to "n" Press the "SET" button to confirm the setting The temperature will return on the display after a few seconds If the P2 alarm continues to be triggered, contact us at 1.877.726.8496 for further assistance