Enlarge Image

CellarPro 1800QTL Cooling Unit, #1151

Our quietest wine cooling unit. Replaces Breezaire 1060 and WineMate 1500 wine cooling units. Optional mounting clips sold separately.

CellarPro 1800QTL Cooling Unit (SKU #1151). CellarPro's 1800QTL is our quietest cooling unit, and was designed for use in smaller wine cabinets and non-ducted small wine cellars.

These cooling units provide outstanding performance and adjustable humidity control.

These cooling units are designed to operate in environments ranging from 40 to 95 degrees.

For installations in environments down to 20°F, we recommend adding our compressor heater modification to the cooling unit. Below 20°F, the cooling unit's performance will begin to degrade.

Capacity: 80 cubic feet in properly insulated and sealed wine cellars.

  • Our Quietest Wine Cooling Unit
  • Electronic Thermostat
  • Digital LED Display
  • Adjustable Humidity Control
  • Energy-Saver Mode
  • Quick-Chill Mode
  • Audible and Visual Alarms
  • High-Output Compressor
  • Electrofin Coated Coils
  • Min/Max Temperature
  • Maintenance-Needed Indicator
  • Auto-Defrost Cycle
  • Ultra-Quiet Operation (41 dBA)
  • Power On/Off Switch
  • Removable Steel Case
  • Power Cord Exits from the Rear
  • Vibration-free Operation
  • 3-Amp light Receptacle
  • Compatible with 15-Amp Circuit
  • Optional Bottle Probe
  • ETL Tested and Certified (UL Standards)
  • 5-Year Standard Warranty
  • Optional Extended Warranty


RRP: $1,095.00

Our Price: $1,095.00

Availability: In Stock / Ships 2-3 Days

  
Qty:
 

You must be logged in to add items to your Wishlist, Click here to login.

New customer? Click here to register

  • Our Quietest Wine Cooling Unit
  • Audible and Visual Alarms
  • Auto-Defrost Cycle
  • Vibration-free Operation
  • ETL Tested and Certified (UL Standards)
  • 5-Year Standard Warranty
  • Capacity:80 Cu. Ft.
  • Size:18w x 16.5d x 10.5h (in)
  • Weight:60 lb
  • Power/Rating:115V AC / 60 Hz
    Compressor Amps:
    - Running: 3 Amps
    - Startup: 14.2 Amps
    - Requires: Dedicated 15-Amp Circuit
    - Recommended: Surge Protector
    Decibels: 41 dBA (Rear)
  • Warranty:5 Years, Parts and Labor
    Optional Extended Warranty
  • SKU:noinfofound
  • UPC:noinfofound

CellarPro Bottle Probe, #1434

Price: $99.00

Check To Add

CellarPro Filter + Frame Kit 1800, #1368

Price: $25.00

Check To Add

CellarPro Mounting Clips 1800 2-Pk, #1092

Price: $10.00

Check To Add

Replaced Grand Cru 800 cooler in Wine Enthusiast BYO Double Wine Cellar

The Grand Cru 800 cooling unit died in the Wine Enthusiast -BYO cabinet about 4 months after the warranty ran out. Bryan, at IWA, recommended the 1800QT. The unit arrived with no problems, and following all the instructions, I was able to modify the hole in my Cellar to accept the slightly larger 1800QT, and got it installed without any issues. (I just needed a drill, a jigsaw, and a screw driver). The 1800QT runs about 75% less than the Grand Cru 800 did, and it's much quieter when it is running. I am very happy with the purchase, and I am very pleased with the service I received from IWA. Bryan was in constant contact, with updates about shipping, and checking to make sure the unit was received in good condition.

Tim Kennedy

Clifton, VA

4/19/2014

Replaced Breezaire unit

Read through reviews and comments and chose CellarPro to replace the Breezaire cooling unit in my Le Cache wine cooler. Shipped promptly and installed in about 45 minutes--perfect fit. Extra hands might have simplified, but not difficult to do by myself.

W Edwards

Norwich, VT

3/25/2014

Replaced a Winemate 2500

Wow! What a difference!! This unit is super quiet and efficient. Extremely happy with my purchase. If you need a new unit this is it!!

Joe R.

California

2/11/2014

Vintage Cellar Replacement Cooling Unit

After fighting cheap systems for too long, I invested in this cooling unit. Since it's a little larger than the original systems some cabinet modifications were necessary, but nothing major. It's been in service for about a week and working well.. It's a little noisier than I expected, but other than that it works as advertised. My wine is now back down to the proper temperature and all is well. As others have noted, the remote bottle temperature probe is a must to keep the unit from cycling too frequently.

J. Bordelon

Baton Rouge, LA

12/4/2013

So far, so good

So far, so good. This is working just as advertised. I had to replace my 6 year Breezaire in my LeCache Euro 3800 Z (back vented, purchased in Oct. 2007). I called LeCache and they recommended replacing with the Cellarpro 1800 QTL. It was delivered quickly, installed easily (about 45 minutes), and so far it's working great - hovering steadily between 58 and 62F (using a bottle probe). I like the placement of the digital readout and the controls. Just about a month in, but this is looking so far like a good purchase.

B. Ross

Encino, California

10/7/2013

La Cache 2400 Cooling Unit Replacement

Breezaire was on its last leg and wasn't able to keep the temperature below 60 so after comparing it to Cellarpro I went with the 1800QTL. Order was delivered quickly and promptly. Used the mounting clips from old Breezaire so if you are ordering a replacement you don't need to order the clips. Fit was absolutely perfect. Installation was simple and yes it does help to have a second person's help as you are in an awkward position lifting and supporting 60lbs. Also it was nice to find butyl tape in the shipment to complete the install. This unit is quieter than Breezaire.

A. Wakida

Rancho Palos Verdes, CA

8/7/2013

Cellarpro 1800

installation and setup was quite easy even though it required enlarging the rear opening. It operates quietly and effectively as well. Good product!!

Gene Davidson

Atlanta, GA

8/7/2013

Cellarpro Cooling Unit Replacement

Although it was expensive to have our replacement unit shipped to our new home in Hawaii, we were very glad we made the purchase and had it sent. It arrived in just a couple of days as quoted, and it was fairly easy to install. It is so nice to have wine at that perfect tempeture again! Thank you for the assistance and excellent customer service.

Pat and Wendie Rooney

Waimea, Hawaii

6/10/2013

Breezaire Replacement

I needed to replace my Breezaire unit that finally went out. Great experience with Cellarpro from start to finish. Bronson was super helpful when I called and the order was processed and shipped quickly (good thing because we were in the middle of a hot spell). The unit looks and works great, extremely quiet compared to my old Breezaire. I only went 4 stars because I have to due some minor carving/sanding on my wine cabinet to get the unit in (the two screw heads and the external outlet plug on the sides of the new unit were just a bit too wide for me to slide it neatly in to the rear of my cabinet). I highly recommend this unit and Cellarpro for anyone looking to replace their old Breezaire cooling system.

Ray Backman

Livermore, CA

10/20/2012

Works Great! Fantastic Service!

I had a Breezaire unit in a cabinet system that I had to have repaired twice. Third time it went bad (leaks in the tubes) I decided to replace it. When I got my new CellarPro in and did the recommended check on it, I discovered that it had apparently been damaged in shipment and one of the fans was not spinning. The service person I dealt with, Mike, was fantastic. He was very courteous and accommodating. After we decided the damage was something I couldn't repair, he was quick to email a shipping tag for me to send back the damaged one and my new unit showed up in short order. The installation was fairly easy, although having two people to do it is a good idea. The unit works great and the service was fantastic.

T. Dean McInturff

San Angelo, TX

10/7/2012

Great replacement unit

I purchased this unit to replace a malfunctioning cold wall system in a Vinotheque cabinet. I didn't want to pay the $1400+ to repair that unit, so I removed it and cut the back of the cabinet to fit the 1800QTL. Not only did it go smoothly, but I much prefer the Cellarpro system as I don't have to call a refrigeration tech to constantly repair it. I was extremely careful when cutting the cabinet (which was only required in my case because I was doing an atypical installation) and I was able to complete everything by myself with no help. Bronson, Cellarpro, and IWA are all great and I'm extremely happy with my purchase.

Corey

Denver

8/13/2012

Larry 8/7/2012

Great product. Well made easy to swap out from a Breezeaire. Very quiet unit. Customer service very helpful and informative.

Larry

Massachusetts

8/7/2012

Cooling unit

So far, so good. I am still surprised at the high price, which I don't want to think about. So it better keep on running! Power supply configuration and exhaust grill configuration were not clear from the sales conversation and required some adaption at installation.

David Huisjen

Tucson, AZ

8/7/2012

Love the new unit

Easy to install, but it did take two people because of weight and slightly awkward. Instructions were perfect. So far working like a charm. My breezeair worked for 13 years, I'm hoping this lasts longer. On line assistance (Bronson) was great. Do not think I needed the new clips (only wasted $10)- also could have used more of the sealing tape.

George

La Jolla California

8/7/2012

Great Unit

Finally got a chance to drop you a quick note. Got my cooling unit installed within a few days of it's arrival. Perfect "swap out" with the Breezeaire - only took a short time to install. Like the filter holder design - easy to remove and replace. Also like the side outlet for the cabinet light - much better than the hard-wired arrangement on the old unit. Kudos to IWA for developing a great unit - look forward to many years of service. It's great to have my wine at a "comfortable" 55 again! Thanks again for your help and prompt service!

Al D

Harvest, AL

8/1/2012

Breezaire Replacement

I ordered my new unit after my Breezaire went out (after 5 years and 3 months). It arrived promptly and installed just as La Cache said it would. Works perfectly now. Thanks

James Mutz

Texas

7/9/2012

Replaced Koolspace unit

We replaced a Koolspace unit that was a replacemant for a previously failed Koolspace unit. I was not interested in replacing it again in 3-4 years so we decided to try this unit. It required some cutting as it is larger but that was the only inconvenience. If you get this unit be sure to get the mounting brackets. This saved time and aggravation and is worth the price. An inadequate amount of butyl tape for sealing was included. If directions are followed on cutting the hole size, 1/4" more than dimensions, the 1/4" gap on top requires a doubling of the already deficient amount of tape. (40" is included for a device with dimesions of 18x10.5) The documentation is not the greatest. The unit is quiet.

Gary Steele

Wisconsin

7/7/2012

Keeping My Wines Cool this Summer

Installed an 1800QTL in my 75 square foot wine closet this week. It seemed the perfect unit for my needs. It was heavy - about 60 pounds - for a 71 year old to heft overhead but I used a shelf rather than clips and it slid in easily. The shelf tilts back per the installation instructions. Ah, the instruction! They seem to be in random order. It took me forever to realize that the unit does not start when plugged in. There is an On/Off button. Is the max run time for the initial checkout 5 or 10 minutes? Depends on whether you go by the label pasted on the unit or the instruction booklet. I needed more than 40" of butyl tape to seal the unit -- would it have killed CellarPro to send 2 packages? And why after the test run must one wait 24 hours to turn the unit on for good? Also my unit was manufactured 6/12. I hope these units are not like orange juice with a useby date. All in all it looks nice and is easily cooling my closet - I'm in the Pacific Northwest where summer starts July 4th or later. I intent to lower the preset of 58 degrees to 55 degrees but the instruction say wait 2 weeks. So far, so good!

Don

Medina, WA

7/7/2012

Replacement for Le Cache Wine Cellar 500 (10500)

Like others, my old Breezaire (top vented) went out and I replaced it with the 1800 QTL. Delivery was very prompt. Unlike other reviews however, the unit fit perfectly with no modifications to the back wall. Directions on this web site and with the unit were very good. I did the job myself, but can see where another pair of capable hands would have been helpful. Tips: start in the back, remove the grill and light connections (install a plug to the light as mentioned in another review); loosen the ceiling bolts/mounting clips ~3/4" but no need to remove - the old unit can be shifted side-to-side and lowered; as mentioned elsewhere, remove the front grill of the 1800QTL as this makes connecting the hanging clips very easy. Also, check all of the gaskets and seals - I had to replace some of the metal contact surfaces as they were warped and created gaps. This may have contributed to the demise of the old Breezaire, but may also have resulted from the cellar being "warm" for a week. CellerPro quietly reduced the temperature to 58DegF in less than a day despite the almost full cellar. Currently the fan doesn't turn off following the cooling cycle, but everything else works great.

Steve P.

Phoenix, AZ

6/10/2012

CellarPro 1800QTL

I replaced my Breezaire 1060 unit after 15 years. The customer service rep was extremely helpful with the specifications and features of the CellarPro 1800QTL. After two weeks I'm very happy with the unit, which was easy to install, but needed a second person to put it place. The instructions were very helpful and like the LED temperature readout, which I didn't have on my Breezaire.

Les

New Jersey

6/7/2012

Works Great

I replaced my cooling unit after about 8 years. The new CellarPro works great. Easy to install.

Steve

Chicago

5/7/2012

CellarPro 1800 QTL

Used this to replace my 25 year old Breezeaire. Customer rep was very helpful in finding the correct unit for my wine closet. It fit perfectly and the instructions were well done, and its working great!

Chip

atlanta

4/9/2012

CellarPro 1800QTL

Like previous reviewers, I had two failed Breezaires and didn't really want to go that route again. Researched the 1800QTL and it looked like a better choice. I needed someone to install it for me, and he and his helper got it in with no problem. So far it's working perfectly and is very quiet (it's in our family room). There's just a subtle hum when it's running.

Karen

San Diego

9/7/2011

Cellarpro QTL 1800

This replaced on a 17 year old Breeze Air that had been worked on a couple of times. The old unit at the end ran continuously, kept the wine at about 63 degrees, and was very noisy. The Cellar Pro runs so quietly I need to check to confirm it is running. I removed the old unit by myself with the help of some of the packing styrofoam but needed a helper to install the new unit. It went in easily and using the old clips was a breeze. It fit perfectly in the exisiting opening. The light for our storage unit was wired into the old cooling unit so I needed to spend the princely some of $2 to purchase a new plug. The trip to Home Depot was the most time consuming piece of the installation process. It has been in one week now with no problems. The digital thermometer and control is much better than using a bottle thermometer and screwdriver to set the proper temperature. This unit has the benefit of improved technology but it is much better than the old Breezeaire

Ron

Phoenix, AZ

9/7/2011

CellarPro 1800 QTL

Like many other previous reviewers, I replaced a Breezaire WKCE 1060 for my credenza cellar unit. The Breezaire unit was only 7 years old and had been running noisily at 65-67 degrees for the last 10 months (I emptied out the cellar during most of this period). I was advised not worth repairing the Breezaire. For $200 more, I was recommended by an independent dealer to replace it with a CellarPro instead. The CellarPro was installed by a serviceman. He had to enlarged the rear window by 3/8 of an inch. He also had to install an electrical plug to plug-in the light inside the cellar. I have the CellarPro unit for more than 3 weeks now. So far, I am quite happy with the CellarPro unit. It runs very quiet and maintains a constant set temperature. I also suggested the same CellarPro recently to a friend for replacing a Vinotemp cooling system.

Min

Sacramento

9/7/2011

CellarPro 1800QTL

After two failed Breezaire units under warranty, I upgraded to the CellarPro. Installation in my LeCache cellar was direct and easy. the new unit is quiter and is working as advertised so far. I like the additional operating features and display information.

Frank L.

CA

8/26/2011

CellarPro QTL

I, too, replaced a worn out Breezaire. Installation was easy but it is a 2 man job, though the 2nd person is only needed for guiding and minimal lifting - the lead needs to be able to manipulate 60#. Here are some tips for replacing in a cabinet. If the old unit has clips, re-use them if at all possible - the screw holes are already drilled. The clips from my Breezeaire fitted better than the C'Pro clips. In fact my only criticism of the unit is that one of the new clips was really difficult to install even on the bench. In the event I didn't use it. I used a length of expanded polystyrene pipe insulation as a support for the front of the old unit as I undid the screws. As the weight went on to foam it gradually compressed and lowered the old unit. We got the new unit on to the carpet we were using to protect the top of the racks and then pushed the foam in to lift the front of the unit. One went to the back and guided the strongman manoevering into back opening. We set it flush with the back. As mentioned elsewhere REMOVE the front grille and fit the clips from the OLD unit before putting the unit in the cabinet. You can then slide the clips to line up with the old holes. This worked like a charm for us. We then replaced the front grille. The whole job took less than an hour. Now lets see how it works. Good Luck

Bill

Henderson NV

8/6/2011

CellarPro 1800

Delivery was very fast, just a couple of days. Installation in my cabinet may have been possible with one person, but it was extremely helpful to have 2 as the 1800 is somewhat heavy and bulky. I removed the old Breezaire 1060 from my cabinet without difficulty (good ridance). I found it necessary to cut ~1/8 of an inch off one edge of the cabinet opening in order to fit the new Cellarpro unit into place. (NOTE: if you install the cooling unit from the front, it will fit perfectly.) The caulking material provided was easy to apply around most of the unit. On the front edge I did need some additional weather stripping that I picked up at the hardware store. With installation complete I turned it on. Works like a DREAM. So efficient. It cycles on about 60-70% of the time to keep my wine a comfortable 57. ( We only air condition the house down to 78.) Drastic improvement over the junky Breezaire unit. I should have replaced it years ago.

Allen F

Walnut Creek, CA

7/7/2011

CellarPro 1800

I replaced a worn-out Breezeaire 1060 with this unit. Installation was easy...it is a good idea to get someone to help with lifting the unit into place, since it is heavy and you don't want to damage the cooling fins on the back. It works great, is quiet, and doesn't have to work hard at all to maintain proper temperature.

Dan

Bedford, NY

7/7/2011

Pretty Cool

Installed my Cellar Pro 1800 this morning by myself and I must say it was pretty damn easy. Nice suprise. I was a little disappointed to see it show up on the delivery truck on it's side, especially since all of the litature says not to do that. You might want to think about adding to your directions to remove the front grill when installing. It makes it very easy to install the clips that way. Now let's see if it lasts.

Ron

Laurel, MD

6/11/2011

CellerPro 1800

I purchased the CellerPro 1800 to replace the unreliable Breezaire 1600 in my Le Cache 2400 cabinet. The CellerPro is performing well; however replaceing the Breezaire was difficult. The CellerPro is ever so slightly larger than the Breeziare and would not fit into the back mounting bracket. I had to pry the bracket wider to accept the CellerPro. Other than the installation problem, the unit is working well.

Gene

Durham, North Carolina

4/7/2011

CellarPro 1800

We have been quite pleased with our new CellarPro cooling unit. It arrived promptly, was easy to install, and is keeping our wine at the selected temperature.

Dianne

Chicago, IL

3/22/2011

Perfect

The delivery was prompt. I replaced a breezaire 1060 and it could not have been easier. It has nice controls, but the best part is set it and it works great.

Pat

Massachusetts

11/7/2010

POOR

The unit did not work when it arrived. The power cord was improperly installed. They sent me a new cord and refused to reimburse for the cost of my electrician disassembling and re-assembling. Telephone manner was terrible. They seemed to imply that I must be crazy to think that they're product was not getting any power.

Sam

New Jersey

8/24/2010