Remote Dixell Controller UC #37438
Overview
Our remote kit allows the LED Display panel to be placed remotely from the unit cooler, inside or outside the cellar. The LED Display panel connects via 18-gauge low-voltage wiring to a power module inside the cooling unit.
Details
Remote Wired LED Display Kit UC (P/N 37438) Our remote Dixell controller is wired to the Dixell power module which is factory-installed inside the unit cooler via 10' of low thermostat wiring*.
Features include:
- Connected via 10 feet of 18-gauge low voltage wiring*
- Can be installed anywhere that's convenient for you, inside or outside the wine cellar
- Provides all features and functionality of the standard controller
- An air probe is located on the face of the cooling unit, which must be located inside the cellar
- Kit requires both components - the LED display and the power module
- Must be ordered with the unit cooler and factory installed
- Includes a stainless steel wall mounting plate and screws
*If you'd like more than 10 feet of wire, let us know when you checkout in the "special instructions" field. We charge $0.50 per foot after the first 10 feet.
Please note:
- Neither variable speed fans nor the condensate evaporator (not available on all units) are controlled by the standard controller and the remote display/control kit
- The LED display panel has a red (not blue) display
- This configuration is incompatible with our bottle probe. If you wish to use the bottle probe, choose itemRemote Dixell Controller + Probe UC #37439
- This item must be purchased at the same time as the unit cooler
This item is for exclusive use with CellarPro Unit Coolers.
Features
Our remote kit allows the LED Display panel to be placed remotely from the unit cooler, inside or outside the cellar. The LED Display panel connects via 18-gauge low-voltage wiring to a power module inside the cooling unit.
- Connected via 10 feet of 18-gauge low voltage wiring*
- Can be installed anywhere that's convenient for you, inside or outside the wine cellar
- An air probe is located on the face of the cooling unit, which must be located inside the cellar
- Kit requires both components - the LED display and the power module
- Must be ordered with the unit cooler and factory installed
- Includes a stainless steel wall mounting plate and screws
- *If you'd like more than 10 feet of wire, let us know when you checkout in the "special instructions" field. We charge $0.50 per foot after the first 10 feet.
Specs & Resources
Brand: CellarPro
UPC: 077757374388
Size: 2 3/4w x 1 1/4d x 1 1/4h (mounting) (in)
Weight: 0.75 lbs
Warranty:
1 Year
Cut Sheet for Remote Display Control [PDF]