Compressor Heater RETROFIT 6200/8200VS #30241
Our thermostat regulated compressor heater attaches to the compressor and provides reliable heating during critical cold periods and when the system is idle. The thermostat regulates the heater to reduce energy consumption, yet still provides the necessary heat.
The compressor heater is required when the condenser (hot) side of CellarPro cooling units will be exposed to temperatures below 40F.
Compressor Heater RETROFIT 6200/8200VS (P/N 30241). When the cooling unit is exposed to cold temperatures or sits idle for extended periods, the refrigerant in the compressor can migrate into the crankcase oil when the compressor is not running. On startup, this can cause excessive motor wear and a loss of refrigeration efficiency. The compressor heater protects the compressor from damage in cold conditions below 40F.
- Enables cooling units to be exposed to temperatures below 40F
- Works effectively and reliably
- Extends compressor life
Specs & Resources
Weight: 0.5 lbs
120V / 45 Watts