CellarPro 1800H Houdini Duct HOOD COLD SIDE #35618

• Attach to the cold side airflows (intake and exhaust), allowing the cooling unit to be located remotely (ie away from the cellar), as follows:
  • Cold air return: must be ducted from the left side (as shown)
  • Cold air exhaust: must be ducted from the front (as shown)

• Insulated flex ducting is not included with this bundle. If you'd like to purchase the bundle WITH ducting, please order item #35619 instead
• Ducting must be 8-inch diameter or equivalent from start to finish
• Ducting must be insulated to R-6 or better
• We recommend adding our remote display/control unit #1603 (sold separately)
• The high fan speed must be used when ducting this cooling unit

• Designed to work with cold-side airflow openings on the 1800H Houdini cooling unit
• Requires 8-inch insulation (R-6 or better), not included

Please refer to the following resources before purchasing this kit:

• This kit may only be used in conditioned, low humidity environments. Use our Low RH vs High RH Duct Kit Chart to determine whether this kit is appropriate for your installation.
• Use our ducting heat loss table and our duct correction table to correctly adjust the sizing of your cooling unit, because ducting will add to the thermal load of the cellar.

• Owner's Manual
• Duct Hood Drawings - As Ducted
• Ducting Installation Best Practices
• Configuration Options