CP Drain Line 1800 BOTTOM + Heating Element #7432
Condensate drain lines are strongly recommended for wine cellar installations of 1800 Series wine cooling units in humid environments with 110V power and/or when the drain line cannot be used. This item MUST be factory-installed - it cannot be retrofitted in the field.
Condensate Drain Line Bottom + Heating Element CellarPro 1800 (P/N 7432). When the wine cooling unit will be installed in a wine cellar with hot, humid conditions, our 100W heating element is designed to burn off excess moisture. In addition, the 1/2-inch ID condensate fitting and 8-foot clear vinyl tube allows overflow condensation to exit from the bottom of the cooling unit.
Please note: This item will work only in 110V environments. The drain line is located 7- inches from the rear of the cooling unit. Therefore, the front 10 inches of the cooling unit MUST be located inside the wine cellar when used with this configuration.
- 100W internal heating element
- Works in 110V environments
- 1/2-inch ID condensate fitting
- 8-foot drain line