Wired Remote Display/Control Factory Installed #1603
Overview
Wired remote control kit and wiring allows the control panel to be placed remotely, inside or outside the cellar, instead of on the face of the cooling unit.
Details
Wired Remote Display/Control Factory Installed (P/N 1603). Our wired remote display/control kit replaces the standard controller and allows the digital display panel to be installed remotely from the cooling unit, inside or outside the cellar.
Features include:
- Connected via 10 feet of 18-gauge low voltage wiring*
- Can be installed anywhere that's convenient for you, inside or outside the wine cellar
- Provides all features and functionality of the standard controller
- Perfect for cooling units that will be installed in remote or hard-to-reach locations
- Includes a stainless steel wall mounting plate
*If you'd like more than 10 feet of wire, let us know when you checkout in the "special instructions" field. We charge $0.50 per foot after the first 10 feet.
Please note:
- Neither variable speed fans nor the condensate evaporator (not available on all units) are controlled by the standard controller and the remote display/control kit
- The remote display/control panel has a red (not blue) LED display
- The remote display/control kit replaces the standard controller of the cooling unit
- This item must be purchased at the same time as the cooling unit because it must be installed in the factory**
**If your cooling unit has already shipped, one of the retrofit kits must be purchased instead.
Refer to the Resources tab (below) for drawings and installation guides.
Features
- Connected via 10 feet of 18-gauge low voltage wiring*
- Can be installed anywhere that's convenient for you, inside or outside the wine cellar
- Provides all features and functionality of the standard controller
- Perfect for cooling units that will be installed in remote or hard-to-reach locations
- Includes a stainless steel wall mounting plate
Specs & Resources
Brand: CellarPro
UPC: 077757016035
Size: 2 3/4w x 1 1/4d x 1 1/4h (mounting) (in)
Weight: 1 lbs
Warranty:
1 Year
Cut Sheet for Remote Display Control [PDF]
Ratings & Reviews
13 reviews
CellarPro Cooling Unit Remote Display
by Frank C
The way my cooling unit is mounted means I have to reach through the wine racks to control my unit. This remote will solve this problem. I was concerned how this would look but with the mounting plate as noted in another review, I am confident it will look beautiful in my cellar. This company cares and is responsive to us and has helped me from cellar design, installation and use. They continue to help with technical assistance and support that provides great confidence that our wine is properly protected.
Cellar Pro Cooling Unit with Remote Display
by Cary S
Have cooling unit in second home location. Have not installed as yet but process of troubleshooting problem with another unit and purchase of this was helped greatly by Mike from Cellar Pro. This company went out of their way to try to solve other problems not directly related to their product and call me back after discussions with their engineers. This company has been very helpful to me.
Thermostat
by Michael C
The control unit works perfectly. Unfortunatly it is small (3"X11/4") and does not come with any type of housing to allow mounting with screws and drill hole for wire. The unit is the excact one that normally comes mounted on the cooling unit. I was expecting something better not the one that was designed for the unit. Not sure if I'm going to cut a 3" X 11/4" hole in my wall I may try something else.
Note from CellarPro
Thanks to our customers' feedback, we have added brushed steel wall plate to the remote control display item.