1800H Houdini Duct HOOD Hot + Fan #35645

Allows the hot side of CellarPro 1800H Houdini cooling units to be ducted up to 100 equivalent feet (50 feet per duct) using 6-inch ducting with no reductions from start to finish.

CellarPro 1800H Houdini Duct Hood (Hot Side) with Inline Fan (P/N 35645). These duct hoods are designed exclusively for the hot side of CellarPro's 1800H Houdini cooling unit, as follows:

• Attach to the hot side airflows (intake and exhaust), allowing the cooling unit to push its exhaust and/or pull its fresh air from remote locations (but not from the cellar), mitigating tight installations with insufficient space around the cooling unit, as follows:
• Fresh air intake: can be ducted from the top (shown) or the right side of the cooling unit
• Hot air exhaust: can be ducted from the top (shown) or the rear of the cooling unit

Each bundle includes:

• 2 hoods (1 for intake and 1 for exhaust, both on the hot side)
• 1 inline fan with wiring for switched-power

Please note:

• Insulated flex ducting is not included with this bundle. If you'd like to purchase the bundle WITH ducting, please order item 30352 instead
• Ducting must be 6-inch diameter or equivalent from start to finish
• The duct hoods MUST be used for the hot side; the cold side CANNOT be ducted with a fan

The maximum length of ducting is 100 equivalent feet with the fan.

• Designed to work with hot-side airflow openings on the 1800 Houdini cooling unit
• Includes an inline fan and wiring for switched power from the cooling unit